Whole House Filtration Installation
Bay Area's #1 Choice

A whole house system (Point-of-Entry) is installed at the main water line and filters every drop of water entering your home, including the water used for showering, laundry, and the dishwasher. An under-sink system (Point-of-Use) only treats the water at one specific faucet. Whole house systems protect your plumbing and appliances from scale and sediment, while under-sink systems are typically focused on high purity drinking water.

A professional installation typically takes 3 to 6 hours. This includes cutting into the main water line, mounting the filtration units, and installing bypass valves so you can still have water during future filter changes. The complexity depends on whether your main line is easily accessible in a garage, basement, or utility closet.

If sized correctly for your home's flow rate, you should not notice a significant drop in pressure. However, as filters become clogged with sediment over time, the pressure will gradually decrease. This is actually a helpful indicator that it’s time to change the filter cartridges to restore full flow.

Carbon filtration is highly effective at removing chlorine, chloramines, pesticides, herbicides, and volatile organic compounds (VOCs). This significantly improves the taste and smell of your water and prevents the "pool-like" chlorine odor often found in municipal water supplies, which can also be harsh on your skin and hair.

Specific high-capacity carbon and specialized resin filters are designed to significantly reduce PFAS and PFOA levels. If this is a primary concern, we recommend a multi-stage system that includes a dedicated stage for these contaminants to ensure your family's water meets the highest safety standards.

Most sediment pre-filters are replaced every 3 to 6 months, while main carbon tanks or large cartridges typically last 6 to 12 months. The lifespan depends heavily on your local water quality and the total volume of water your household consumes. We recommend an annual check-up to ensure the system is operating at peak efficiency.

A standard carbon or sediment filter does not remove "hardness" (calcium and magnesium). To prevent scale buildup in your pipes and water heater, you would need a dedicated water softener or a salt-free conditioner. We often install these as a combined "dual-stage" system to provide both purified and conditioned water.

Yes, and it is often essential. Well water frequently contains high levels of iron, manganese, and sulfur (which smells like rotten eggs). We use specialized media filters specifically designed to oxidize and remove these minerals, preventing stains on your fixtures and odors in your laundry.

In many jurisdictions, a plumbing permit is required because the installation involves a permanent modification to the main water supply. This ensures the bypass valves and connections meet local building codes. We handle the necessary documentation to ensure your installation is fully compliant.

Yes. Since the filtration system is under constant pressure from the main line, a seal failure can lead to significant water damage. We provide 24/7 emergency service to bypass the system or repair any leaks immediately, ensuring your home remains dry and your water service is restored.